How Non-Alcoholic Beer Is Made?

Can a person take beer without getting drunk? Yes- teetotalers too can take a beer or two without ruining their sobriety! The non-alcoholic beer gives you the original beer without the “drunk” effects of alcohol.

The production and consumption of non-alcoholic beer have experienced a sharp increase in America and the rest of the world. By 2020, the non-alcoholic beer market was already pouring over to the north of $9.5 billion. Global Market Insights reports predict that the industry will hit over 26 billion by 2026.

The alcohol-free beer enjoys a warm reception, especially from people pursuing healthy lifestyles. It’s, therefore, no wonder that most people these days prefer non-alcoholic beverages in social and corporate gatherings.

In this post, we’ll take you through all processes on how to make non-alcoholic beer.

How Non-Alcoholic Beer Is Made1 (1)

What’s non-alcoholic beer?

Just as the name sounds, non-alcoholic beers are beverages that went through the same brewing process as conventional brews but no alcohol content.

The methods of preparation of a non-alcoholic beer determine whether it will taste like beer. And, a well-brewed NA beer isn’t a secondary drink to the traditional version. It tastes, smells, and has the same depth, but free of hangovers.

However, the United States laws allow up to 0.5% of alcohol in non-alcoholic beer. For this reason, the drink is also called light beer, small beer, and near beer.

How Non-Alcoholic Beer Is Made?


How Non-Alcoholic Beer Is Made2

Whether you’re a teetotaler or a curious person, you’ll probably sit to wonder how a beer can be brewed, fermented and packed alcohol-free. And that’s precisely what we’re seeking to answer.

The process of brewing nonalcoholic beer rolls out just like the ordinary beverage. The malt is mashed into the wort and then fermented with yeast. Then, the brewer removes all the alcohol from the beer before carbonating and packaging it.

The process starts with malting, then milling, mashing, brewing, fermenting, maturation and packaging.

  • Malting: The barley is soaked in water and left to sprout or germinate. This makes starch soften for easy conversion to sugar. It is then dried up in a kiln.
  • Miling:  The dried-up malta grains are ground to a fine consistency. Milling gives the barley a large surface area upon which yeast will and enzymes will act on the starches. The fine flour is mixed with water.
  • The mashing process: Malta’s fine grounds are pulverized to convert the few remaining starches to sugar. Then, the sugars are going to dissolve into the water.
  • Heating:  The mixture is then heated to about 75°C (167°F). The mash tun produced is then filtered into a wart.
  • The brewing process: After boiling the wort for about 2 hours, the grains give up their color, flavor, and aroma. Lots of the water is then removed from the wort.
  • Cooling: The wort is then filtered so the solid materials can be removed and then cooled immediately to give yeast room to survive into the fermentation stage.
  • Fermentation stage: The cold wort is then saturated with enough oxygen and added to the fermentation tank. Yeast works on this product for about ten days.
  • Maturing up:  After fermentation, the beer is put into a conditioning tank to age. This step allows all off-flavors to disappear. Also, all colors and aromas that are not good enough are also removed.
  • Dealcoholization:  By this time, the beer is concentrated with lots of alcohol. It’s at this stage that the conversion to non-alcoholic beer occurs.
  • Packaging: And, when the beer is ready, it is filtered, carbonated, and bottled.

Top Ways of Making 0.0% Alcohol Beer

Removing the alcohol can be done by heating it to evaporate the low-boiling point ethanol. However, this method ends up distorting the flavor of the beer. So, researchers in the Middle East – a region known for its strict laws against alcohol use- found out that you can also separate the alcohol through pressurized de-alcoholization.

By 2020, the Middle East was already accounting for more than a third of all the global sales of alcohol-free beer.

1. Dealcoholization

The dealcoholization is the process by which alcohol is removed from the beer. Reverse osmosis or running water vapor or distillation separates the ethanol from beer.

  • Through reverse osmosis

High pressure forces the beer to go through a membrane and leaves behind all the larger molecules. The tiny water and alcohol molecules go through the membrane while the larger ones- the beer’s flavor and calories- stay behind.

In the end, you get a high concentration of beer on one end and alcohol and water on the other. The high-tech pressure equipment then separates water from the alcohol through distillation before channeling it to the beer.

  • Distillation

Some brewers heat the mixture to the boiling point of alcohol and therefore distilling the steam. Alcohol boils at a lower temperature than water, and thus, most of it is evaporated in this process.

Unfortunately, heating beer could dissipate its aroma and flavors. However, advanced technology allows heating the beer at low pressure to maintain the flavor while evaporating the alcohol. The method of vacuum distillation yields high-quality beer flavors with little or no alcohol.

  • Gas stripping

Water and alcohol are very soluble in each other, and brewers use this principle to dealcoholize beer. The beer is heated gently in a vacuum, and then water vapor or an inert gas such as nitrogen runs through it.

This picks up the alcohol while leaving behind the beer. However, some of the flavors may also join the drink. Some advanced machines will remove the taste from the alcohol and then take it back to the beer.

2. Controlled Fermentation

Alcohol is produced during the fermentation process. The yeast breaks sugars down to alcohol as one of the byproducts. If you can control how effectively the yeast breaks down these sugars, you may end up with 0.5% ABV.

  • Using low sugar grains

The first method reduces the number of fermentable sugars in the wort. When there is little sugar, the alcohol produced will be far less. Some brewers might decide to use rice or corn instead of barley or wheat because they have fewer extractable sugars.

  • Special yeast

Different strains of yeast will produce different flavors and an additional amount of alcohol. There are yeast strains that cannot ferment maltose. Others give a low amount of alcohol as a byproduct.

Such yeast will achieve the 0.5% ABV quickly. Unfortunately, it also means that if not all sugars are acted upon by the yeast, they might soon get to the final product, and you will have a beer with lots of calories.

  • Manipulating the fermentation process

The fermentation process requires optimum temperature pressure and concentration. If any of these factors is interrupted, the changes will either slow down or even stop the entire fermentation process.

So, adjusting the acidity, pressure, and temperature of the fermentation environment will restrict yeast’s action on the starch. Brewers, therefore, use this method to create a somewhat “unfinished” beer.

3. Simulated Fermentation

Some brewers don’t do any fermentation at all! We all know how vital the fermentation process is to beer. It’s the main reason why the drink gets its fizz, flavor, and alcohol.

But, some brands on the market shelves these days don’t give the lowest hoot to fermentation. Instead, they make a few cheat ingredients that make the beer taste like the original.

4. Dilution

Some brewers simply make high concentrated beer using the traditional method. After the fermentation, they dilute the concentrate until it measures 0.5% on the ABV scale. The dilute beer is there carbonated and bottled.


  • Will non-alcoholic beer make me drunk?

Most alcohol-free beers contain up to 0.5% alcohol. However, this is still not enough to make you drunk. Admittedly, the ethanol is a natural product of fermentation.

  • Can I use non-alcoholic beer in my weight loss plan?

If you are trying to lose weight, you need to cap on your alcohol intake. The alcohol-free beer has fewer calories than traditional brews. These brews have about 50 to 80kcal per 300 ml bottles, while the traditional brews have nearly 200kcal. So, the non-alcoholic drink will be a great accompaniment.

  • Can minors buy non-alcoholic beer?

Some states in America permit the sale of low-alcohol beer to minors. However, some states restrict the drinking age to 21.

Non-alcoholic Beer Benefits

How Non-Alcoholic Beer Is Made4

  • The alcohol content in light beers is so low that you can drink and drive.
  • You’d need to serve several gallons to feel woozy.
  • The beverage significantly reduces the hangover, as this drink is not too diuretic.
  • Low alcohol content means low calories than other beers.
  • Contains several minerals and nutrients.
  • It could help you abstain from regular alcoholic brews. Studies have shown that people who take low ABV drinks recover from the addiction faster than those who don’t. In short, this beverage simulates beer and many people satisfy their thirst, but without the addictive part of alcohol.
  • And, you bypass the side effects of alcohol.

Cons of Using Non-alcoholic Beer

  • The boiling process of dealcoholization distorts the flavor.
  • With a 0.5% ABV, this beverage can still set the path to drunkenness. Many states in America even ban its sale to people below the age of 21.
  • The American College of Obstetrics and Gynecology (ACOG) discourages you from taking non-alcoholic beer when pregnant. ACOG warns that the little beer in the beverage can cause Fetal Alcohol Spectrum Disorder.


How Non-Alcoholic Beer Is Made5

Sharing is caring!

1 thought on “How Non-Alcoholic Beer Is Made?”

  1. How about detailing which brewery uses which method, if you know or can figure it out? I’ve definitely tasted the Wort version and wasn’t pleased.


Leave a Comment